Enables a port.
| port_list | Specifies one or more ports or slots and ports. |
| all | Specifies all ports on the switch. |
All ports are enabled.
Use this command to enable the port(s) if you disabled the port(s) for security, administration, or troubleshooting purposes.
The following command enables ports 3, 5, and 12 through 15 on the stand-alone switch:
enable ports 3,5,12-15
The following command enables ports 3, 5, and 12 through 15 on the switch:
enable port 3,5,12-15
This command was first available in ExtremeXOS 10.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB