Displays information about neighbors in ports.
| port_list | Specifies the port list, separated by a comma. |
| configuration | CDP local port configuration. |
N/A.
Use this command to display CDP port information.
The following command displays neighbor port information on the CDP feature:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# show cdp ports
Neighbor Information--------------------
Port Device-Id Hold time Remote CDP Port ID
Version
---- --------- --------- ---------- --------------------
1 Eni-Extreme-x440-sw> 149 Version-1 Slot: 1, Port: 1
2 00:04:96:8B:9D:B0 160 Version-2 Slot: 1, Port: 2
7 00:04:96:8B:C1:ED 138 Version-2 Slot: 1, Port: 7
Note
">" indicates that the value was truncated to the column size in the output.Local Port Information ---------------------- Port Trust COS Voice-VLAN ---- ---------- ---- -------------------- 1 Trusted 0 none 2 Untrusted 4 none 7 Untrusted 0 Default
This command was first available in ExtremeXOS 15.4.
The output of this command was updated in ExtremeXOS 21.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.