Configures the mode of operation for ESRP (Extreme Standby Router Protocol) on the switch.
| extended | Specifies ESRP extended mode. |
| standard | Specifies ESRP standard mode.. |
The default mode is extended.
The following command configures ESRP to run in standard mode:
configure esrp mode standard
This command was first available in ExtremeXOS 11.0.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB