configure ports link-flap-detection

configure ports [port_list | all] link-flap-detection [on | off]

Description

Turns on or off link-flap detection.

ports	Physical ports.
`port_list`	List of ports to activate link-flap detection upon.
all	Activates link-flap detection on all port in the system.
on	Link-flap detection is on.
off	Link-flap detection is off.

Link-flap detection is disabled by default.

The following example turns off link-flap detection on ports 1–15:

Configure ports 1-15 link-flap-detection off

This command was first available in ExtremeXOS 22.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next