Displays current group definitions as they are defined dynamically by the controller via the OpenFlow protocol.
| group_id | Specifies the OpenFlow group. |
N/A
If you do not specify a group name, information for all groups will be displayed.
The following example displays the current OpenFlow groups.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB
show openflow groups
Total number of groups: 3
Group Group Bucket Action
Id Type Num List
--------- -------- ----- --------------------------------------------
300 ALL 0 set_field:00:04:96:83:74:2c->eth_dst
push_mpls:0x8847
set_field:19->mpls_label
push_vlan:0x8100
set_field:4197->vlan_vid
output:1
400 ALL 0 set_field:00:04:96:83:74:2c->eth_dst
push_mpls:0x8847
set_field:20->mpls_label
push_vlan:0x8100
set_field:4197->vlan_vid
output:1
1000 SELECT 0 push_pw_hdr:0x8847
set_field:275->mpls_label
pw_rx_label:0x0131
group:300
1 push_pw_hdr:0x8847
set_field:276->mpls_label
pw_rx_label:0x0141
group:400
This command was first available in ExtremeXOS 15.7.1.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the OpenFlow feature, see the ExtremeXOS 22.4 Feature License Requirements document.