configure cfm group add rmep

configure cfm group group_name add rmep mepid

Description

This command allows you to create and associate an RMEP to a group.

mepid

Specifies the MEP ID of the remote MEP being created. The range is 1 to 8191.

N/A.

Use this command to create and associate an RMEP to a group.

configure cfm group “eapsCfmGroup” add rmep 2

This command was first available in ExtremeXOS 15.2.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next