Enables CDP on a port.
| seconds | Specifies the transmit frequency in seconds. The range is 5,254 seconds. The default value is 60 seconds. |
60 seconds.
The following command configures the CDP frequency as two minutes:
configure cdp frequency 120
This command was first available in ExtremeXOS 15.4.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB