Configures the port through which a master node sends EAPS (Extreme Automatic Protection Switching) hello PDUs.
| name | Specifies the name of an EAPS domain. |
Default is the primary port.
This command is provided for special network topologies that use spatial reuse and require that all EAPS hello PDUs travel in the same direction on the ring.
Note
We recommend the default (primary-port) configuration for this command.
The following command configures the master switch to send EAPS hello packets from the secondary port:
configure eaps "domain12" hello-pdu-egress secondary-port
This command was first available in ExtremeXOS 12.4.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB