configure iparp delete

configure iparp delete ip_addr {vr vr_name}

Description

Deletes an entry from the ARP table.

`ip_addr`	Specifies an IP address.
`vr_name`	Specifies a VR name.

If you do not specify a VR or VRF, the current VR context is used.

Removes any IP ARP entry (dynamic or permanent) from the table. You must specify the IP address of the entry to delete the entry.

The following command deletes an IP address entry from the ARP table:

configure iparp delete 10.1.2.5

This command was first available in ExtremeXOS 10.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next