Disables route entry tracking for an ESRP (Extreme Standby Router Protocol) domain.
| esrpDomain | Specifies an ESRP domain name. |
| ipaddress | Specifies the IPv4 address of a tracked route entry. |
| masklength | Specifies the subnet of a tracked route entry. |
Disabled.
If you disable route tracking for a failed route, the ESRP domain recovers from the forced standby state.
If you disable route tracking for a route that is up and functional, there is no impact on the ESRP state.
The following command disables tracking of routes to the specified subnet for ESRP domain esrp1:
configure esrp esrp1 delete track-iproute 192.168.46.0/24
This command was first available in ExtremeXOS 11.0.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB