Deletes the ESRP (Extreme Standby Router Protocol) domain with the specified name.
| esrpDomain | Specifies the name of an ESRP domain to be deleted. |
N/A.
You must first disable an ESRP domain before you delete it. To disable an ESRP domain, use the disable esrp command.
You do not have to remove the master or member VLANs from an ESRP domain before you delete it. When you delete an ESRP domain, All VLANs are automatically removed from the domain.
For ESRP domains configured of type VPLS-redundancy, you need to unconfigure all associated VPLS instances from the ESRP domain using the unconfigure vpls redundancy command before deleting the domain.
The following command deletes ESRP domain esrp1 from the switch:
delete esrp esrp1
This command was first available in ExtremeXOS 11.0.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB