show counters vr

show counters vr {vpn-vrf-name}

Description

Displays statistics information about VPN VRF operation.

Syntax Description

vpn-vrf-name

Specifies the name of a VPN VRF.

Default

N/A.

Usage Guidelines

This command displays counters that show:

The total number of IP unicast and multicast routes.
Route add operation count.
Route delete operation count.
Routes dropped count.
Note
The total route count displayed for this command can exceed the total route count displayed by the show iproute command because the show iproute command displays either unicast or multicast routes, but not both.

This command is supported only on VPN VRFs.

Example

The following example displays the counters for VPN VRF "red":

Switch.19 # show counters vr red
Num of Current Routes: 4            Num of Routes Dropped: 0
Num of Route Add:      12           Num of Route Del:      6
Num of Current Routes: 10           Num of Routes Dropped: 0
Num of Route Add:      5             Num of Route Del:      2

History

This command was introduced in ExtremeXOS 15.3.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback