configure snmpv3 target-addr timeout

configure snmpv3 target-addr [[hex hex_addr_name] | addr_name] timeout timeout_val

Description

Configures the SNMPv3 INFORM notification timeout.

`hex_addr_name`	Specifies the address name in hexadecimal format.
`addr_name`	Specifies the address name in ASCII format.
`timeout_val`	Specifies the number of seconds.

The timeout value default is 15 seconds.

Use this command to configure how many seconds to wait for a response before resending an SNMPv3 INFORM.

The following command configures a timeout value of 20 seconds for the target address A1:

configure snmpv3 target-addr A1 timeout 20

This command was first available in ExtremeXOS 12.5.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next