show msrp talkers

show msrp talkers {egress | ingress | ingress-and-egress} {port port_num}{source-mac-addr source_mac_addr | stream-id stream_id}

Description

Shows MSRP talker attributes.

Syntax Description

msrp	Multiple Stream Registration Protocol.
talkers	Talker attributes.
egress	Display egress talkers only (default).
ingress	Display ingress talkers only.
port	Filter based on ingress port number of the stream.
source-mac-addr	Filter based on source MAC address of a data stream.
stream-id	Filter based on stream ID of a data stream.

Default

N/A.

Usage Guidelines

Use this command to shows MSRP talker attributes. The output can be filtered based on the stream id, source MAC, or port number on which the talker is registered.

Example

# show msrp talkers            
      Stream Id            Port  Dec     Dir     State         Failure Code                                                 
                                                App  Reg   
  -----------------------  -----  ----  -------  ---  --- ----------------------   
00:50:c2:4e:d3:2d:00:00     19  Adv   Egress   QA   MT   -                               
                            21  Fail  Egress   QA   MT   AVB incapbl port(8)   
00:50:c2:4e:d3:2d:00:01     19  Adv   Egress   QA   MT   -                               
                            21  Fail  Egress   QA   MT  AVB incapbl port(8)   
  -------------------------------------------------------------------------------   
App      : Applicant State,                Dec   : MSRP Declaration Types,   
Dir      : Direction of MSRP attribute,    Reg   : Registrar State       

MSRP Declaration Types:      
   Adv   : Talker Advertise,               Fail  : Talker Fail       

Applicant States:      
   AA    : Anxious active,                 AN    : Anxious new,      
   AO    : Anxious observer,               AP    : Anxious passive,      
   LA    : Leaving active,                 LO    : Leaving observer,      
   QA    : Quiet active,                   QO    : Quiet observer,      
   QP    : Quiet passive,                  VN    : Very anxious new,      
   VO    : Very anxious observer,          VP    : Very anxious passive       

Registrar States:      
   IN    : In - Registered,                LV    : Leaving - Timing out,      
   MT    : Empty - Not Registered

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on Summit X450-G2, X460-G2, and X670-G2 switches if the AVB feature pack license is installed on the switch.

Published December 2017prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback