enable ip-fix ports

enable ip-fix ports [port_list | all] {ipv4 | ipv6 | non-ip | all_traffic}

Description

Enables IPFIX on the ports.

`port_list`	Specifies the ports.
all	Specifies all ports.
ipv4	Meter IPv4 traffic.
ipv6	Meter IPv6 traffic.
non-ip	Meter non-IP layer 2 traffic.
all_traffic	Meter IPv4, IPv6, and non-IP traffic. This is the default.

The default is disabled. When enabled, the default is all_traffic.

The following command enables IPFIX metering of IPv6 traffic on port 2:1:

enable ip-fix ipv6 ports 2:1

This command was first available in ExtremeXOS 12.5.

This command is available on Summit X460-G2 series switches.

Published December 2017prev | next