enable snmp traps lldp

enable snmp traps lldp {ports [all | port_list]}

Description

all	Specifies all ports on the switch.
`port_list`	Specifies one or more ports or slots and ports.

Disabled.

Note

To enable SNMP traps for LLDP MED TLVs, you must issue a separate command; use the enable snmp traps lldp-med {ports [all | port_list]} .

If you do not specify any ports, the system sends LLDP traps for all ports.

Note

The Avaya-Extreme proprietary TLVs do not send traps.

The following command enables LLDP SNMP traps for all ports:

enable snmp traps lldp ports all

This command was first available in ExtremeXOS 11.2.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next