Modifies the schema served by the OVSDB server.
| schema | OVSDB schema. |
| hardware_vtep | Specifies Hardware VXLAN Tunnel End-Point (VTEP) schema. |
| control-layer-only | Disables schema, but leaves the forwarding layer intact. |
N/A
By default all schemas supported by ExtremeXOS are served by the OVSDB server when it is initially enabled. Currently, only the Hardware VTEP Schema is supported. Deleting a schema from the OVSDB server removes the data stored in that schema and the OVSDB server stops supporting that data schema. VLAN (Virtual LAN), VXLAN, or other objects that were dynamically created in ExtremeXOS as a result of OVSDB commands received by the switch are removed from ExtremeXOS. Any schema-specific configurations made by the administrator are not affected.
The optional keyword control-layer-only overrides the default behavior and leaves in place all configurations pushed by the Network Virtualization Controller (NVC) to the ExtremeXOS switch. VLAN, VXLAN, or other objects that are created as a result of NVC configurations are also not deleted. The schema is no longer served by the OVSDB-SERVER.
The following example removes the Hardware VTEP schema from OVSDB:
disable ovsdb schema hardware_vtep
This command was first available in ExtremeXOS 22.1.
This command is supported on the Summit X770, X670-G2, and ExtremeSwiching X870, X690 series switches, and stacks with X770, X670-G2, X870, and X690 slots only.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB