configure bootprelay delete

configure bootprelay {ipv4 | ipv6} delete [ip_address | all] {vr vrid}

Description

Removes one or all IP destination addresses for forwarding BOOTP packets.

ipv4	DHCPv4 BOOTP Relay service (default).
ipv6	DHCPv6 BOOTP relay service.
`ip_address`	Specifies an IP address.
all	Specifies all IP address entries.
`vrid`	Specifies a VR name.

If you do not specify a VR, the current VR context is used.

If you do not specify DHCPv4 or v6 BOOTP Relay service, DHCPv4 is used.

None.

The following command removes the destination address:

configure bootprelay delete 123.45.67.8

This command was first available in ExtremeXOS 10.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next