Configures the location of the switch.
| sysLocation | An alphanumeric string that specifies the switch location. |
N/A.
Use this command to indicate the location of the switch. A maximum of 255 characters is allowed.
To view the location of the switch on the switch, use the show switch command. The show switch command displays switch statistics including the location of the switch.
The following example configures a switch location name on the system:
configure snmp syslocation englab
The following output from the show switch command displays englab as the location of the switch:
SysName: engineeringlab SysLocation: englab SysContact: FredJ
This command was first available in ExtremeXOS 10.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB