disable mpls static lsp

disable mpls static lsp {lsp_name | all }

Description

Administratively disables one or all static LSPs.

Syntax Description

lsp_name Identifies an LSP to be disabled.
all Specifies that all static LSPs on this LSR are to be disabled.

Default

N/A.

Usage Guidelines

On executing this command, the software de-activates the specified LSPs by setting the administrative state of each LSP to down.

Example

The following command disables a static LSP:

disable mpls static lsp lsp598

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available only on the platforms that support MPLS (Multiprotocol Label Switching) as described in the ExtremeXOS 22.4 Feature License Requirements document.