show network-clock ptp boundary unicast-slave

show network-clock ptp boundary unicast-slave [{vlan} vlan_name | vlan all]

Description

Show the unicast slave table of the specified clock port, or all clock ports. This command is only available for boundary clocks.

Syntax Description

boundary	Specifies the boundary clock.
unicast-slave	Specifies table of unicast masters.
vlan	VLAN (Virtual LAN).
`vlan_name`	VLAN name.
vlan all	Specifies all vlans.

Default

N/A.

Usage Guidelines

Use this command to display the unicast master table of the specified clock port or all clock ports. This command is only available for boundary clocks.

Example

The following command displays the unicast master table for all clock ports:

# show network-clock ptp boundary unicast-slave vlan all
VLAN Name                         IP Address
ptp-m1                            7.1.1.1
ptp-m1                            7.1.2.1
ptp-m1                            88.3.5.1

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the Summit X460-G2, X670-G2, and X770.

Note

PTP commands can be used only with the Network Timing feature pack.

Published December 2017prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback