enable snmp traps identity-management

Description

Enables the identity management feature to send SNMP (Simple Network Management Protocol) traps for low memory conditions.

This command has no arguments or variables.

No traps are sent.

The low memory conditions are described in the description for the configure identity-management stale-entry aging-time seconds command.

The following command enables the identity management SNMP trap feature:

enable snmp traps identity-management

This command was first available in ExtremeXOS 12.4.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next