Statically provisions uplink ports for all dynamically created VLAN (Virtual LAN)s.
| dynamic-vlan | Configuration options for dynamically created VLANs. |
| uplink-ports | Tagged uplink ports for VLANs created by EXOS. |
| add | Add ports to dynamic VLAN uplink port list. |
| delete | Remove ports from dynamic VLAN uplink port list. |
| ports | Ports to be configured as uplink ports. |
| port_list | List of ports separated by a comma or -." ;type=portlist_t"; |
| all | Clear the dynamic VLAN uplink port list. |
N/A.
Use this command to statically provision uplink ports for dynamically created VLANs.
# conf vlan dynamic-vlan uplink-ports add ports 16-18 # conf vlan dynamic-vlan uplink-ports add 20,22,24 # configure vlan dynamic-vlan uplink-ports delete ports 22 # configure vlan dynamic-vlan uplink-ports delete 16-18 # configure vlan dynamic-vlan uplink-ports delete all
This command was first available in ExtremeXOS 15.3.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB