Use this command to display policy profile information.
| profile | Show current policy profile. |
| all | All profile entries. |
| profile_index | Profile index. |
| detail | Displays all information in detail. |
If optional parameters are not specified, summary information will be displayed for the specified index or all indexes.
This example shows how to display policy information for policy profile 11:
Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow policy profile 11
Profile Index :11
Profile Name :
Row Status :active
Port VID Status :disabled
Port VID Override :1
CoS Status :enabled
CoS :7
Syslog on use :disabled
Trap on use :disabled
Disable ingress port :disabled
Replace TCI Status :enabled
Auth Override Status :disabled
Tagged Egress :
Untagged Egress :
Forbidden Egress :
Rule Precedence :1-2,10,12-18,20-22,25,31
:MACSource (1), MACDest (2), IPv6Dest (10),
:IPSource (12), IPDest (13), IPFrag (14),
:UDPSrcPort (15), UDPDestPort (16), TCPSrcPort (17),
:TCPDestPort (18), TTL (20), IPTOS (21), IPProto (22),
:Ether (25), Port (31)
Admin Profile Usage :6
Oper Profile Usage :6
Dynamic Profile Usage :none
This command was first available in ExtremeXOS 16.1.
The authentication override status was added in ExtremeXOS 22.2
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.