show ntp

Description

Displays the global NTP status of the switch.

N/A.

N/A.

N/A.

The following command shows the NTP status of the switch:

Switch# show ntp
NTP                 : Enabled
Authentication      : Disabled
Broadcast-Client    : Disabled
VR                  : VR-Default

This command was first available in ExtremeXOS 12.7.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next