enable bootp vlan

enable bootp {ipv4} | dhcp {ipv4 | ipv6} ] vlan [vlan | all]

Description

Enables the generation and processing of BOOTP packets on a VLAN (Virtual LAN) to obtain an IP address for the VLAN from a BOOTP server.

bootp	Enable BOOTP client.
ipv4	IPv4 client.
dhcp	Enable DHCP (Dynamic Host Configuration Protocol) client.
ipv6	IPv6 client.
`vlan`	Specifies a VLAN name.
all	Specifies all VLANs.

Disabled.

If IPv4/IPv6 keyword is not specified , ipv4 would be taken as default for the mentioned VLAN.

The following example enables the generation and processing of BOOTP packets on a VLAN named "accounting":

enable bootp vlan accounting

This command was first available in ExtremeXOS 10.1.

The ipv4 and ipv6 keywords were added in ExtremeXOS 15.6.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next