Enables the Extreme Loop Recovery Protocol (ELRP) client (standalone ELRP) globally.
This command has no arguments or variables.
Disabled.
The ELRP client must be enabled globally in order for it to work on any VLAN (Virtual LAN)s.
The ELRP client can be disabled globally so that none of the ELRP VLAN configurations take effect. Use the disable elrp-client command to globally disable the ELRP client.
The ExtremeXOS software does not support ELRP and Network Login on the same port.
The following command globally enables the ELRP client:
enable elrp-client
This command was first available in ExtremeXOS 11.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB