Allows you to modify the MAC address of an existing MEP.
|
domain_name |
Enter the domain associated with the MA you are configuring. |
|
association_name |
IEEE 802.1ag or ITU-T Y.1731 association name. |
|
mepid |
Specifies the MEP ID of the remote MEP being modified. The range is 1 to 8191. |
|
mac_address |
Specifies the MAC address for the remote MEP being modified. |
N/A.
Use this command to modify a remote MEP with given MEP ID and MAC address in an existing association. Use the show cfm detail command to verify your configuration.
This command was first available in ExtremeXOS 12.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB