Shows the NTP access list of the current system based on the source IP blocks.
| user | Displays the NTP access list of the current user. |
| system | Displays the for the current system. |
| all | Displays both user and system data. |
| vr | Specifies showing NTP information for a given VR. |
| vr_name | Specifies which VR to show information about. If a VR name is not specified, the VR of the current command context is used. |
Displays all by default.
N/A.
The following command displays all NTP access list information for VR "VR-Mgmt":
# show ntp restrict-list user vr "VR-Mgmt" VR Name IP Address Mask Count Type Action ======================================================================== VR-Mgmt 1.1.1.1 255.255.255.255 0 User Permit
This command was first available in ExtremeXOS 12.7.
The vr keyword was added in ExtremeXOS 22.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB