configure snmpv3 delete target-addr

configure snmpv3 delete target-addr [{[[hex hex_addr_name] | addr_name]} | all]

Description

Deletes SNMPv3 target addresses.

`hex_addr_name`	Specifies an identifier for the target address. The value is to be supplied as a colon separated string of hex octets.
`addr_name`	Specifies a string identifier for the target address.
all	Specifies all target addresses.

N/A.

Use this command to delete an entry in the SNMPv3 snmpTargetAddressTable.

The following command deletes target address named A1:

configure snmpv3 delete target-addr A1

This command was first available in ExtremeXOS 10.1.

The hex_addr_name parameter was added in ExtremeXOS 11.0.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next