Removes an SNMP (Simple Network Management Protocol) VPN identifier for traps from the specified VLPLS.
| vpls_name | Specifies the VPLS for which you are removing the identification string. |
N/A.
None.
The following command removes the identifier for SNMP VPN traps on VPLS vpls1:
unconfigure vpls vpls1 snmp-vpn-identifier
This command was first available in ExtremeXOS 12.4.
This command is available only on the platforms that support MPLS (Multiprotocol Label Switching) as described in the ExtremeXOS 22.4 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB