configure cfm segment frame-loss consecutive

configure cfm segment segment_name frame-loss consecutive frames

Description

This command is used to configure the number of consecutive measurements to be used to determine the availability status of a CFM segment.

`segment_name`	Alphanumeric string identifying the segment name.
frame-loss	Y.1731 Ethernet frame loss measurement.

10.

This configuration is optional.

configure cfm segment cs2  frame-loss   consecutive 10

This command was first available in ExtremeXOS 15.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next