configure erps timer periodic

configure {erps} ring-name timer periodic [ default | milliseconds ]

Description

Configure a periodic timer to control the interval between signal failures.

`ring-name`	Alphanumeric string that identifies the ERPS (Ethernet Ring Protection Switching) ring.
default	The default value, 5000 milliseconds.
`milliseconds`	The interval for the periodic time in milliseconds, with a range of 2000 to 7000.

The default is 5000 milliseconds.

Use this command to configure a periodic timer to control the interval between signal failure.

The following command sets the periodic timer to 6000 milliseconds for an ERPS ring named “ring1”:

configure erps ring1 timer periodic 6000

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published December 2017prev | next