configure erps delete control vlan

configure erps ring-name delete control {vlan} vlan_name

Description

`ring-name`	Alphanumeric string that identifies the ERPS ring.
`vlan_name`	Alphanumeric string identifying the VLAN used for control traffic.

N/A.

Use this command to delete a control VLAN from the ERPS ring. This is the VLAN that carries ERPS control traffic.

Note

Other VLAN types such as VMAN, SVLAN, CVLAN and BVLAN will not be used for control traffic.

A control VLAN cannot be deleted from a ring that has CFM configured.

The following command deletes a control VLAN named “vlan10” from an ERPS ring named “ring1”:

configure erps ring1 delete control vlan vlan10

This command was first available in ExtremeXOS 15.1.

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.

Published December 2017prev | next