Disables processing of the loose source route IP option in the IPv4 packet header.
This command has no arguments or variables.
Enabled.
Disables the switch from forwarding IP packets with the IP option for loose source routing turned on. Packets with the loose-source-route option enabled are dropped by the switch.
The following example disables processing of the loose source route IP option:
disable ip-option loose-source-route
This command was first available in ExtremeXOS 10.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB