show memory process

show memory process name {slot slotid}

Description

Displays the current system memory and that of the specified process.

Syntax Description

`name`	Specifies the name of the process.
`slotid`	In a SummitStack, `slotid` specifies the slot number of the node in the stack topology. The value can be from 1 to 8.

Default

N/A.

Usage Guidelines

Viewing statistics on a regular basis allows you to see how well your network is performing. When you keep simple daily records, you see trends emerging and notice problems arising before they cause major network faults. This way, statistics can help you get the best out of your network.

This information may be useful for your technical support representative if you experience a problem.

Depending on the software version running on your switch or your switch model, additional or different memory information might be displayed.

You can also use the show memory {slot slotid} command to view the system memory and the memory used by the individual processes.

SummitStack Only

When you issue the command with out any parameters:

From the stack manager or backup node, the stack displays current system memory and that of the specified process running on the master node and the back-up node in the Active Topology.
From a standby node, the stack displays current system memory and that of the specified process running on the master node and the standby node in the Active Topology.

Reading the Output

The show memory process command displays the following information in a tabular format:

System memory information (both total and free).
Current memory used by the individual processes.

The current memory statistics for the individual process also includes the following:

For SummitStacks, the slot number.
The name of the process.

Example

The following example displays system memory and VRRP (Virtual Router Redundancy Protocol) memory usage:

show memory process vrrp

The following is sample output from a Summit switch:

System Memory Information
-------------------------
Total DRAM (KB): 262144
System     (KB): 25852
User       (KB): 96608
Free       (KB): 139684
Memory Utilization Statistics
-----------------------------
Process Name     Memory (KB)
-----------------------------
vrrp             11184

The following is sample output from a SummitStack:

Slot-1 stacK.4 # show memory process "aaa"
System Memory Information
-------------------------
Slot-1    Total DRAM (KB): 262144
Slot-1    System     (KB): 25476
Slot-1    User       (KB): 132276
Slot-1    Free       (KB): 104392
Slot-6    Total DRAM (KB): 262144
Slot-6    System     (KB): 25476
Slot-6    User       (KB): 122820
Slot-6    Free       (KB): 113848

Memory Utilization Statistics

-----------------------------
Card Slot Process Name     Memory (KB)
---------------------------------------
Slot-1 1   aaa              2548
Slot-6 6   aaa              2440

History

This command was first available in an ExtremeXOS 11.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback