Displays MAC locking information about end stations connected to the switch.
| first-arrival | Displays only first-arrival MAC locking information. |
| static | Displays only static MAC locking information. |
| port_list | Specifies one or more ports or slots and ports. |
N/A
If you do not specify any parameters, MAC locking information for end stations on all ports (both static and first-arrival) is displayed.
The following example displays MAC locking information for end stations on all ports.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB
show mac-locking stations
Port MAC Address Status State Aging
----- ----------------- -------- ------------- -----
1:2 00:00:11:22:33:00 inactive static false
2:3 00:00:11:22:33:99 active static false
3:4 00:bb:00:00:00:00 active first-arrival false
4:5 00:e0:2b:00:00:01 active first-arrival true
Total for all ports: 4 Static: 2 First-Arrival: 2
This command was first available in ExtremeXOS 15.7.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.