clear network-clock ptp counters

clear network-clock ptp [boundary | ordinary] vlan [vlan_name {ipv4_address [unicast-master | unicast-slave]} | all] counters

Description

This command clears the accumulated PTP packet counters. The clear can be performed on the following groups:

Per unicast-master or unicast-slave peer on a clock port.

Peers on a clock port.

Peers on all clock ports.

Note

This command is available only for Boundary and Ordinary clocks.

network-clock	External Clock for Ethernet synchronization.
ptp	Precise Time Protoco.l
boundary	Boundary clock.
ordinary	Ordinary clock.
vlan	VLAN (Virtual LAN).
`ipv4_address`	Peer IP address.
unicast-master	IP addresses that are masters to the local clock.
unicast-slave	IP addresses that are slaves to the local clock.
all	All VLAN.
counters	PTP message counts.