show vlan statistics

show [{vlan} vlan_name |vlan vlan_list]statistics {no-refresh |refresh}

Description

Displays VLAN (Virtual LAN) statistics at the VLAN level.

Syntax Description

vlan_name Specifies to display VLAN statistics from the VLAN with this name.
vlan_list Specifies a VLAN list of IDs.
no-refresh Specifies that there is no continuous refresh. The prompt comes back to the user after fetching statistics once.

Default

N/A.

Usage Guidelines

This command displays statistics based on the sum of the statistics for individual ports. Use it to display the VLAN statistics monitored using the configure ports [port_list|all] monitor vlan vlan_name | vlan_list {rx-only | tx-only} command.

Example

The following command displays VLAN statistics:

# show vlan statistics
Vlan 				Rx Total 			     Rx Byte 						Tx Total 				Tx Byte
				     Frames 				Count 						Frames 					Count        ===============================================================================
Default 			    30251013                           7326296 											22034					901840
=============================================================================

If the VLAN contains ports that do not support a certain type of VLAN statistic, such as transmit statistics or byte counters, then a dash character ( - ) will be displayed in that column.

History

This command was first available in ExtremeXOS 12.0.

Support for Summit family switches was added in ExtremeXOS 12.5.

The no-refresh keyword was removed in ExtremeXOS 16.1.

The vlan_list variable was added in ExtremeXOS 16.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.