show snmp traps bfd

Description

This command displays session up/down trap reception for BFD.

snmp	Configure SNMP (Simple Network Management Protocol) specific settings.
traps	Configure SNMP Trap generation settings.
bfd	BFD-specific traps.

Not applicable.

Use this command to display SNMP trap reception for BFD session up/down.

The following command displays SNMP Trap configuration for BFD:

#show snmp traps bfd
SNMP Traps for Session Down    : Enabled
SNMP Traps for Session Up      : Enabled
SNMP Traps Batch Delay         : 1000 ms

This command was first available in ExtremeXOS 15.5.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next