This command displays all the entries from the neighbor cache.
| ipv6_addr | Specifies an IPv6 address. |
| mac | Specifies a MAC address. |
| permanent | Specifies static entries. |
| vr_name | Specifies a VR or VRF. |
| vlan_name | Specifies an IPv6 configured VLAN (Virtual LAN). |
| vlan_list | Specifies an IPv6 configured VLAN list of IDs. |
N/A.
This command displays the entries present in the neighbor cache.
The entries displayed can be filtered by IPv6 address, MAC address, or by VLAN. The permanent keyword filters the output to display static entries.
The vr_name indicates the VR or VRF on which the operation is performed. In its absence, the operation applies to VR-Default.
The following example output shows all entries from the neighbor cache:
# show neighbor-discovery cache ipv6 VR Destination Mac Age Static VLAN VID Port VR-Default 2001:db8:100::7 00:01:30:00:6b:00 0 NO gtag100 100 1:2 VR-Default 2001:db8:100::99 00:01:02:33:33:33 0 YES gtag100 100 VR-Default 2001:db8:99::99 00:01:02:01:01:01 0 YES gtag99 99 Total Entries : 0 Dynamic Entries : 0 Static Entries : 0 Pending Entries : 0 Max Entries : 1024 Max Pending entries : 1024 Timeout : 20 minutes Refresh : Enable
This command was first available in ExtremeXOS 11.2.
The vlan_list variable was added in ExtremeXOS 16.1.
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 22.4 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB