Use this command to add entries to the mapping table and to set the map table response state for the switch.
| vlan_list | VLAN (Virtual LAN) ID or range of IDs (1-4094) |
| profile_index | Policy ID (1 - 63). |
N/A.
The policy response is the default response for the configure policy maptable command.
This example adds an entry to the map table that maps VLAN 3 to policy profile 8:
configure policy maptable 3 8
This command was first available in ExtremeXOS 16.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB