Use this command to show the virtual networks that have been created.
| vn_name | Alphanumeric string identifying the virtual network. |
| vxlan | Displays VXLAN virtual networks. |
| vni | A unique 24-bit Virtual Network Identifier that is used in the VXLAN header to encapsulate tenant frames. |
| vni | Virtual Network Identifier value between 1 and 16,777,215. |
| vlan | Specifies VLAN (Virtual LAN). |
| vlan_name | Name of the tenant VLAN. |
| vman | Specifies VMAN. |
| vman_name | Name of the tenant VMAN. |
N/A.
When no option is specified a summary output of all virtual networks appears. You can also query the switch using the virtual network name, VXLAN VNI or the tenant VLAN/VMAN name. With each of these options, detailed information about the virtual networks appears.
# show virtual-network Virtual Network Name Tenant VLAN Encap ID Encap Flags ========================================================== MyVirtualNetwork1 vlan101 VXLAN 10000 -DX MyVirtualNetwork2 vlan102 VXLAN 20000 -DX ========================================================== Encap Flags: (C) Remote Endpoints Configured, (D) Remote Endpoints Discovered, (X) Exclude Tag ---------------------------------------- Total number of Virtual Networks: 2 Local Tunnel Endpoints: 10.10.10.1 (VR-Default)
This command was first available in ExtremeXOS 21.1.
VMAN option added in ExtremeXOS 22.1.
This command is supported on the Summit X770, X670-G2, and ExtremeSwiching X870 series switches, and stacks with X770, X670-G2, and X870 slots only.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB