configure stpd loop-protect event-window

configure stpd stpd_name loop-protect event-window interval

Description

Configures the interval for which loop protect events are counted by the loop protect event threshold.

`stpd_name`	Specifies an STPD (Spanning Tree Domain) name on the switch.
`interval`	The length of the interval, in seconds, over which the loop protect event threshold is defined. The valid range is 0–255 seconds.

By default the interval is set to 180 seconds.

None.

The following example sets the loop protect event window to 120 seconds for STP (Spanning Tree Protocol) domain r1.

configure stpd r1 loop-protect event-window 120

This command was first available in ExtremeXOS 15.7.1.

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published December 2017prev | next