This command deletes a generic port-group name that can be associated with a list of ports. The port_group option could be implemented in configure or show commands that currently accept a port_list. The QoS (Quality of Service) commands are expanded to accept the port_group option.
| port_group | Specifies a port group name. |
N/A.
Use this command to delete a generic port-group name associated with a list of ports.
delete port-group testGroup
This command was first available in ExtremeXOS 16.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB