This command enables VM-tracking dynamic VLAN (Virtual LAN) on specific ports. The ALL option is not supported because VM-tracking dynamic VLAN should never be enabled on a switch's uplink port.
This command has no arguments or variables.
Disabled.
Use this command to enable VM-tracking dynamic VLAN on specific ports. The ALL option is not supported because VM-tracking dynamic VLAN should not be enabled on a switch's uplink port.
The following command enables VM tracking dynamic VLAN on port 2:1:
enable vm-tracking dynamic-vlan ports 2:1
This command was first available in ExtremeXOS 15.3.
This command is availability on all platforms.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB