This command clears all existing Convergence End Point (CEP) connections per port.
| ports | Specify ports to configure. |
| port_list | Designates which ports to clear CEP connections from. |
N/A
The following example clears CEP connections from port 3:
# configure policy convergence-endpoint clear ports 3
This command was first available in ExtremeXOS 22.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB