Configures the priority for the segment.
| segment-name | An alpha numeric string identifying the segment name. |
| dot1p_priority | Priority value that is set in the DMM/DMR. The range is 0 to 7. |
The default is 6.
Use this command to configure the dot1p priority that a DMM/DMR frame can get.
The following example configures a dot1p priority of 3 for segment s2.
configure cfm segment s2 dot1p 3
This command was first available in ExtremeXOS 12.3.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB