Displays the user-configured banners.
| after-login | Specifies the banner that is displayed after login. |
| before-login | Specifies the banner that is displayed before login. |
N/A.
Use this command to display specific configured CLI banners.
If no keywords are specified, all configured banners are displayed. To display a specific banner, use the before-login or after-login keyword.
The following command displays the configured CLI switch banners:
show banner
Output from this command varies depending on your configuration; the following is one example:
Before-login banner: Extreme Networks Summit Switch ######################################################### Unauthorized Access is strictly prohibited. Violators will be prosecuted ######################################################### Acknowledge: Enabled After-login banner: Press any key to continue
This command was first available in ExtremeXOS 10.1.
The after-login option was added in ExtremeXOS 12.5.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB