Enables sending SNMP (Simple Network Management Protocol) trap when saving or changing the switch configuration.
| configuration | Sends SNMP trap for switch configuration. |
| save | Generates SNMP trap when switch configuration is saved (default is disabled). |
| change | Generates SNMP trap when switch configuration is changed (default is disabled). |
The default is that SNMP traps are disabled for switch configuration changes/saves.
The following example enables SNMP traps for switch configuration changes:
enable snmp traps configuration change
This command was first available in ExtremeXOS 22.1.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches..
Print
this page
Email this topic
Feedback
View PDF
Download EPUB